ICON 2021-2022 Ford Bronco Extreme Duty Tie Rod Kit 45212
2021-2022 FORD BRONCO
45212
ICON 2021-2022 Ford Bronco Extreme Duty Tie Rod Kit
Pricing:
$399.99
Description
ICON is proud to introduce our XD Forged Tie Rod Kit for the 6th Generation Ford Bronco. The strength limitations of the Bronco's factory steering tie rods has been well documented, especially by Bronco owners who venture into the big rocks with big tires. These ICON XD Forged Tie Rods remedy this with better materials and beefier dimensions than the stock units. The inner tie rod and ball stud is CNC machined from 4140 chromoly. The adjustment threads, where we've seen most of the failures happen on stock tie rods, are 18mm on the XD Forged Tie Rods versus 14mm on stock Bronco tie rods. The outer tie rod is forged steel and has the same bend as the stock tie rods for fitting all of the Bronco's factory wheel diameters and offsets, along with just about any aftermarket wheel. The tie rod end is a beefier, metal on metal joint that is greaseable for extended service life. It has the same range of operating angle as the stock tie rod ends.
30% larger diameter than OE tie rods
4140 chromoly inner ball studs
Forged steel outer tie rod ends
Metal on metal ball joint design with grease zerks
Design to fit around factory wheel off set
Includes inner tie rod boots that protect the steering rack from dirt and debris
Limited lifetime warranty
30% larger diameter than OE tie rods
4140 chromoly inner ball studs
Forged steel outer tie rod ends
Metal on metal ball joint design with grease zerks
Design to fit around factory wheel off set
Includes inner tie rod boots that protect the steering rack from dirt and debris
Limited lifetime warranty
Tech Notes
TECH NOTE: Compatible with OE HOSS 1.0 & HOSS 2.0 steering racks
TECH NOTE: Also compatible with HOSS 3.0 steering racks but the dust boot must be stretched to fit over the rack housing
TECH NOTE: Not compatible with Bronco Raptor
TECH NOTE: Not compatible with aftermarket tie rod braces
TECH NOTE: Also compatible with HOSS 3.0 steering racks but the dust boot must be stretched to fit over the rack housing
TECH NOTE: Not compatible with Bronco Raptor
TECH NOTE: Not compatible with aftermarket tie rod braces
Details
- 45212
- 45212
- ICON Vehicle Dynamics
- New
Categories
Shipping Information
- Item Requires Shipping
- 7.0 lbs.
- W14.0000” x H8.0000” x L6.0000”
Customer Reviews
Total Reviews (0)
You must login to post a review.
Write the First Review!